ConServ Epoxy LLC

CONSERV EPOXY LLC

203.484.4123 Northford CT 06472

Offering various FLEXIBLE and STRUCTURAL epoxies for your restoration needs

Epoxy Consolidants

Flexible Epoxy Consolidant 100 Original Slow Curing Formula

Available Sizes: 1/2 Gallon, 1 Quart, 1 pint, 1/2 pint, 1/4 pint, 2 fl oz

ConServ Epoxy 100 Consolidant is a 2 part Epoxy system that is flexible, slow curing, and a low viscosity. It is designed to saturate and encapsulate wood decay, prime damaged areas, and seal the end grain of new and old wood to prevent future decay. ConServ Epoxy 100 is most often used prior to the application of ConServ Flexible Epoxy Patch 200, and also could be used before any of ConServ's other epoxy systems, especially on porus substrates. The Epoxy 100 is fully compatible for a wet on wet application of our other epoxies, meaning before the 100 has cured. This wet on wet option provides the best chemical bond.
Price break at 6, 12, 24 and 48+ pieces of any combination of 100, W100, 200, S200, W200, and W300 epoxy formulas, all sizes.
Please read the following documents fully to familiarize yourself with the ConServ Flexible Epoxy Consolidant 100 Series:
Instructions and Technical Data
SDS for ConServ Epoxy 100 A
SDS for ConServ Epoxy 100 B
Specifications
NOTE: Air Shipment of this product is only available by request. Please call our office (203)484-4123 for information.
Flexible Epoxy Consolidant 100 Original Slow Curing Formula

Quantity in Basket: none

Flexible Epoxy Consolidant W100 Faster Curing Formula For Cold Weather

Available Sizes: 1/2 gallon, 1 quart, 1 pint, 1/2 pint, 1/4 pint, 2 fl oz

ConServ Epoxy W100 Consolidant is a 2 part Epoxy system that is flexible, and has a low viscosity. W100 is a faster curing version of the original ConServ Epoxy 100, designed especially for cold weather applications. It is designed to saturate and encapsulate wood decay, prime damaged areas, and seal the end grain of new and old wood to prevent future decay. ConServ Epoxy W100 is most often used prior to the application of ConServ Flexible Epoxy Patch 200, and also could be used before any of ConServ's other epoxy systems, especially on porus substrates. The Epoxy W100 is fully compatible for a wet on wet application of our other epoxies, meaning before the W100 has cured. This wet on wet option provides the best chemical bond.
Price break at 6, 12, 24 and 48+ pieces of any combination of 100, W100, 200, S200, W200, and W300 epoxy formulas, all sizes.
Please read the following documents fully to familiarize yourself with the ConServ Flexible Epoxy Consolidant 100 Series:
Instructions and Technical Data
SDS for ConServ Epoxy W100 A
SDS for ConServ Epoxy W100 B
Specifications
NOTE: Air Shipment of this product is only available by request. Please call our office (203)484-4123 for information.
Flexible Epoxy Consolidant W100 Faster Curing Formula For Cold Weather

Quantity in Basket: none

Rigid Epoxy Repair 600-1 (10 gallon set)

Available Sizes: 10 Gallon Set (smaller sizes available, listed seperately)

600-1 Rigid Epoxy Repair: This 10 gallon set is shipped in 2 (5) gallon pails.
ConServ 600 RIGID EPOXY REPAIR is a high strength epoxy designed for various applications where flexibility, tooling or detailed finishing is not required. Use only A and B liquid as a low viscosity rigid consolidant for decay, add ConServ Epoxy 200-1 D fumed silica thickener to create a paste for filling small to medium size voids or cast large voids by adding aggregate and a little thickener to hold the resins in suspension while curing. Casting large voids with the use of sand and/or stone aggregate will minimize heat generation (exothermic reaction) and increase the volume with less epoxy. The 600 Rigid epoxy is harder to sand and drill than our other epoxies. If unsure about product choice, call ConServ for technical support.
Price break at 2, 5 and 9+ pieces.
Please read the following documents fully to familiarize yourself with the ConServ Rigid Epoxy Repair 600:
Instructions and Technical Data
SDS for ConServ Epoxy 600 A
SDS for ConServ Epoxy 600 B
Specifications
SDS for ConServ Epoxy 200 D (thickener)
Rigid Epoxy Repair 600-1 (10 gallon set)

Quantity in Basket: none

Rigid Epoxy Repair 600 (smaller sizes)

Available Sizes: 2 gallon, 1 gallon, 2 quart, 1 quart, 1 pint, 1/2 pint

ConServ 600 RIGID EPOXY REPAIR is a high strength epoxy designed for various applications where flexibility, tooling or detailed finishing is not required. Use only A and B liquid as a low viscosity rigid consolidant for decay, add ConServ Epoxy 200-1 D fumed silica thickener to create a paste for filling small to medium size voids or cast large voids by adding aggregate and a little thickener to hold the resins in suspension while curing. Casting large voids with the use of sand and/or stone aggregate will minimize heat generation (exothermic reaction) and increase the volume with less epoxy. The 600 Rigid epoxy is harder to sand and drill than our other epoxies. If unsure about product choice, call ConServ for technical support.
Price break at 3, 6 and 10+ pieces, all sizes combined.
Please read the following documents fully to familiarize yourself with the ConServ Rigid Epoxy Repair 600:
Instructions and Technical Data
SDS for ConServ Epoxy 600 A
SDS for ConServ Epoxy 600 B
Specifications
SDS for ConServ Epoxy 200 D (thickener)
Rigid Epoxy Repair 600 (smaller sizes)

Quantity in Basket: none